The main characteristics of line processing

Small size and light weight, the initial design of the wire board is used to replace the larger volume of the wire harness lead. On current cutting-edge electronic device assembly boards, wiring is often the only solution to meet miniaturization and mobility requirements. Wiring (sometimes called flexible wiring) is the etching of copper circuits or printed polymer thick film circuits on a polymer substrate. For devices that are both thin and light and have their compact and complex structure machined by wire harnesses, the design solutions range from single-sided conducting lines to complex multi-layer three-dimensional assemblies. The total weight and volume of the wiring is reduced by 70% compared to the traditional circular wire harness method. The wire can also be strengthened by the use of reinforcing materials or lining for additional mechanical stability.

The wire can be moved, bent and twisted without damaging the wire, and can comply with different shapes and special package sizes. Its only limitation is the problem of volume space. Because it can withstand millions of dynamic bends, the wiring is well suited for use in connected systems with continuous or periodic motion and is part of the end product function. The solder joint on a rigid PCB is subjected to thermal mechanical stress and will fail after hundreds of loops. Jenny, Product Manager at EECX, says: "Certain products that require electrical/power movement and have a smaller form factor/package size benefit from wiring."

The wire has excellent electrical properties, dielectric properties and heat resistance. The CEO of LT Electronic said: "The lower dielectric constant allows for fast transmission of electrical signals; Good thermal properties make components easy to cool down; The higher glass transition temperature, or melting point, allows the element to function well at higher temperatures.

Wiring for higher assembly reliability and quality. Wiring reduces the hardware required for internal connection, such as solder joints, trunks, baseboard wiring and cables commonly used in traditional electronic packages, so that wiring can provide higher assembly reliability and quality. Because of the complex multi-system composition of traditional embedded hardware, there is a high component misalignment rate during assembly. The stiffness of the wiring is low, the size is small, and because of the small size of the wiring board components, less material is used." With the advent of quality engineering, a thin flexible system was designed to be assembled in only one way, thus eliminating many of the human errors normally associated with independent wiring engineering. Suzhou Sun Yue Electronics Co., Ltd. is a professional electronic wiring harness processing factory.